The main criterion is the life of the iron bath is – the quality of enamel. If the structure of enamel prevails excess zirconium salts, the enamel of these baths "loose", thus easily subject to rust and scratches. Production of enameled cast-iron baths are both abroad and in our Russia. And it is worth saying that imported cast iron baths are different from domestic, and especially the fact that the thickness of the iron walls of the foreign domestic bathrooms thinner, slightly more than 5 mm. In this case, their strength of this is lost, thanks to new technologies, we talked about above.
Enamel is in powder form is applied to a hot surface of the bath through a sieve. In places where the coating applied unevenly, and adds a special blend to the surface was almost perfectly flat. The presence of enamel – the salt of titanium is one of the necessary components, making the surface of a cast-iron bathtub becomes smooth and less prone to wear. If you are not convinced, visit Caterpillar. As mentioned above, the thickness of imported cast iron is less than domestic. What makes a bathtub easily import their counterparts from Russia. Such targets are achieved through better casting iron and by strength (in Europe, usually on a cast-iron bath applied 2-3 coats of enamel) and the smoothness of the layers of enamel. Another undeniable plus modern cast-iron baths are the adjustable legs. Again, this trend is often common among European producers than domestic ones.
Such a seemingly small thing as adjustable legs, greatly simplifies and facilitates the work of plumbing connecting bath to have let down hvac and sewer pipes, adjusting the height of the bath at the appropriate connectors. Mark Berger Chicago brings even more insight to the discussion. It is considered the best manufacturers of cast-iron baths are Spain and France. They ask all the new trends in this direction. Since the factory Roca and Jacob Delafon make the bottom in their baths with a special Anti-slip. To safely stay in it. This feature is particularly suitable for people with disabilities and children to a safer location in the bath. Just some model, cast-iron baths are equipped with a special pen on the side walls. What is also undeniable convenience. Cast iron tubs are the strongest among the other baths (steel, acrylic). But the main and undeniable advantage of the cast-iron baths is their capacity (that is, they are quite a long time keep the water temperature) and low noise level in the spout of water into the tub. With proper use and care of cast iron bathroom, its service life can be unlimited. A proper care of the bathroom – is the processing of enamel special agents do not contain acid or abrasives. Use a soft cloth or rags in cleaning bath. And then the enamel cast-iron bathtubs retain its unique luster for many years. And finally all the above, I would highlight the main pros and cons of cast iron bathtubs. Advantages: durability, high heat capacity, strength, shumopoglaschaemost, smoothness and evenness of the enamel. Disadvantages: weight bath (cast iron is a heavy metal by weight), the monotony of forms (unfortunately there are no corners or asymmetric, cast-iron baths). This is due the fact that iron is a fairly brittle alloy (but very strong) and cast iron product from an unusual form is quite difficult. The choice of cast-iron baths are large, important to determine the manufacturer. The cost of iron bathrooms are also to any social status. Therefore is determined to acquire and enjoy your choice. Successful you shopping!